Aquinity² P35/P70 versions have an independent tank from which RO water can be tapped (e.g. for glassware cleaning).
The water quality from this tank depends on the feed water quality; in general the RO holds back 98% of all ions. The tank can be installed at the side or above the system or even underneath the bench.
Tapping of ultrapure water is done with our flexible but also lockable dispenser as incorporated in all membraPure UPW systems. Built-in TOC monitoring is also available with the Aquinity² P35/P70 versions.
Aquinity² P35/P70 is the perfect system for a medium-sized lab.
Permeate rate: 10 l/h
Resistivity: 18.2 MOhm x cm
Reservoir: 35 l or 70 l
Flow Rate UPW: 2 l/min
<10 ppb (Reagent)
<1 ppb (Analytical with UV)
<5 ppb (LifeScience with UV and UF)
Endotoxins: < 0.001 EU/ml endotoxins (LifeScience)
Aquinity² E35/E70 systems contain an electro deionization (EDI) cell to produce Type II water with a production rate of 10 l/h.
The systems are equipped with 35 l or 70 l storage reservoirs. The water can be dispensed directly from the reservoir. In Aquinity² E35/E70 models the water from the reservoir has a very high quality of <0.1 μS/cm and can therefore be used for less sensitive applications.
Also this high water quality prevents the polisher cartridge to be exhausted quickly. So for all labs which use more than 100l/day the Aquinity² E35/E70 is also an economical and ecological (less waste) wise decision.
All Aquinity models are available in different versions (Reagent, Analytical LifeScience)